In Wire-drawing, a wire of comparatively larger diameter is drawn through a die with a smaller bore-size. This eventually, reduces the diameter of the wire to the preferred size and tolerance, keeping the volume intact. The desired wire-size is achieved by drawing the wires through a series of dies having descending bore-sizes. The final die in this series, sizes the wire to the preferred final-size. Bharat Industries develops dies to achieve drawing of various steel alloys including High-Carbon steel, Stainless Steel, Mild Steel and many more.

Bharat Industries has special mastery in manufacturing fine size dies ranging in sizes from 0.15mm to 0.8mm used specially in CO₂ MIG & Stainless Steel Wire drawing.

Drawing Dies used in tube or pipe drawing can be of any custom shapes, including commonly used round, hexagonal and square. The drawing process is very similar to wire-drawing. The major difference is usage of a mandrel. This mandrel is placed at the gorge of die and its size determines the Die inner diameter as well as wall-thickness. A well-finished mandrel achieves smooth surface on the inner side of the tube or pipe.

Bars and Rods drawing is no different than Wire/Tube or Pipe drawing. The significant difference is that rod/bar tends to be much thicker then wires or tubes.